Reduction motor refers to the combination of reducer and motor. This combination can also be called a gear motor or a gear motor. Basically, it is supplied in a complete set with the motor after integrated assembly by a professional reducer manufacturer. If there is smoke from the planetary reducer, you think that the smoke problem caused by the motor overheating caused by the high temperature of the machine at the first time. Of course, there is more than one factor leading to the smoke of the motor. There are several other reasons for the smoke of the planetary reducer: 1、 Reduction motor voltage too high or wiring error If the voltage of the reduction motor is too high, it will lead to smoke. At this time, it is necessary to reduce the voltage appropriately, and then check whether there is a problem with the wiring. If it is found, it is necessary to correct the wiring immediately. 2、 Motor overload operation During the operation of the gear reduction motor, the reducer is overheated and may even burn out the gear reduction motor. This phenomenon is generally the most common. There are generally two reasons. One is the overload operation of the gear reduction motor. In this case, the user should check the rated power and load of the reduction motor, and adjust the speed to the combined gear, The second is the lack of lubricating oil, which only needs to be filled with lubricating oil on time. 3、 Frequent forward and reverse rotation of motor or excessive starting times Properly reduce the forward and reverse operation or frequent starting times of the reduction motor, or use other types of motors to reduce the damage of the motor. 4、 Poor ventilation or exposure of motor Check whether the fan of the motor is damaged or not fixed tightly. Pay attention to whether there are objects affecting ventilation and remove them in time to prevent smoke caused by temperature rise. 5、 The motor voltage is too low and the driven machine is stuck or poorly lubricated If the voltage is too low and the power line is too thin, these factors may cause smoke problems. Replacing the power line can increase the voltage. If there is overload, you need to reduce the load. You can also use some cooling equipment to reduce the temperature and reduce the calorific value.
Our products are mainly exported to Japan, the United States, Germany, Southeast Asia and other countries and regions. Our customers include many OEM customers specializing in construction machinery. We have partnered with several of the Fortune 500 companies to become one of their major foundry suppliers in China.
How to provide goods?
Usually we will ship the goods to the sea. The factory is only 460 kilometers away from the port. It is very convenient and convenient to transport the goods to any other country. Of course, if your cargo is very urgent, Ningbo Airport and Shanghai Airport are also nearby.
What is the payment term?
When we provide you with a quotation, we will negotiate with you: EXW, FCA, FOB, CIF, CRF, DAP Etc. For mass production, you need to pay 30% of the deposit before production and 70% of the balance before shipment. Our most common way is T/T.
How to ensure the quality of your products?
First, we will check after each process. For finished products, according to customer requirements and international standards.
How many employees does your company have? What is the relationship between technicians?
We now have more than 180 employees, including 36 engineers and 28 QCs.
What is the ability of your company?
We have a number of production lines with a monthly production capacity of 1,600 units and an annual production capacity of 20,000 units.
