Author: Site Editor Publish Time: 05-01-2023 Origin: Site
Oil leakage of planetary reducer is a common problem, which will increase the cost of enterprises in the long run, cause equipment damage, and easily cause some production accidents. Therefore, it is also very important to reduce the leakage of planetary reducer. What are the treatment methods for oil leakage of planetary reducer? Listen to the introduction of the Great Wall:
Planetary reducer
1、 Surface treatment
Extend the oil leak for 1cm to both sides, use a polishing machine to make the metal primary color, and clean it with alcohol or acetone.
2、 Concordant material
Mix in proportion and stir until there is no color difference.
3、 Application material
This is the most commonly used method. First, repair with repair materials. After confirming that there is no leakage, cover with rubber polymer repair and protection materials.
4、 Curing
8 hours/24 ℃ (material temperature). Normal temperature humidity can be used to accelerate the curing of materials.
The maintenance operation of planetary reducer is related to the development of enterprises. Leakage not only wastes resources, but also increases the maintenance intensity. Therefore, Golden Great Wall reminds everyone that relevant measures must be taken to reduce the leakage, vibration and other problems of planetary reducer, improve the operation efficiency, and reduce the maintenance and operation costs of enterprises.
m32 gearbox,6 speed automatic transmission,semi automatic gearbox,worm gear motor,power steering gear box,
XLED8145-1849-0.37KW planetary cycloid pinwheel reducer 8000 series XLED85-121
Characteristics and pros and cons analysis of cycloidal pinwheel reducer
ZSY280-56-1 coaxial hard tooth surface gear reducer ZSY250-40-1 elevator technical analysis
Different size combinations of BWD7-59-22KW pinwheel planetary gear reducer and XWD10-87-22KW