Views: 0 Author: WeiGao Transmission Publish Time: 2021-10-14 Origin: WeiGao Transmission
The reducer motor is a machine integrating the motor and reducer. The advantage of the reducer motor is the power transmission organization structure. The gear speed is used for conversion to reduce the rotation number of the motor to the required rotation number and obtain the carrier of large torque.
The motor of the reducer motor generally uses the transmission equipment with high torque and low speed to transport the motor, internal combustion engine or other high-speed power to the large gear of the gear reducer with few teeth through the gear reducer motor to achieve the purpose of deceleration. The ordinary reducer motor will achieve the same effect on the gear reducer with the same principle. The ratio of the number of teeth of the gear size is the transmission ratio.
The principle of this kind of reducer is:
1. Reduce the speed while increasing the output torque of the gear reduction motor. The torque output ratio shall be multiplied by the motor output by the reduction ratio, but it shall not exceed the rated torque of the reducer.
2. Reduce the inertia of the load while decelerating, and the reduction of inertia is the square of the reduction ratio. Usually motors have inertia values.
It is also quick and convenient to install, but it should also be noted that:
The reduction motor needs stable voltage; The specification is consistent with its design specification; No damage and oil leakage on the appearance; The fixed base is not loose; Put in lubricating grease and do not change the lubricating oil for 12000 hours; The current shall not exceed the current value indicated on the nameplate of the motor reducer; Pay attention to the surrounding temperature, humidity, pH and other problems; Correct installation, maintenance or operation; Confirm that the installation parts and transmission accessories are fixed; The motor reducer needs grounding wire.