Horizontal BWY0-29-0.37KW cycloidal pinwheel reducer is a transmission device widely used in various industrial equipment. It has a planetary reducer as its core and has reliable performance.In modern industrial production, the role of transmission devices cannot be underestimated. It is an indispensable part of mechanical equipment. It can transmit high-speed rotating power to working mechanisms that require low speed and high torque, thereby achieving the normal operation of the equipment.Therefore, it is crucial to choose a transmission device with stable performance and reliable use.BWY0-29-0.37KW cycloidal pinwheel reducer adopts advanced cycloidal pinwheel transmission technology, which has the advantages of high transmission efficiency, low noise and smooth operation.Its reduction ratio range is wide and can meet the transmission needs of different equipment.At the same time, the reducer has a compact structure, easy installation, and can adapt to various complex working environments.Planetary reducer as BWY0-29-0.37KW pendulum Read More

Y15-71-0.75KW chemical mixer BWY550-29-45KW welded pipe machine cycloidal gear reducer are two very critical equipment in modern industry. They play important roles in different fields.Let’s take a closer look at the features and applications of these two devices.First, let's take a look at the BWY15-71-0.75KW chemical mixer.This blender uses advanced technology and design to deliver efficient stirring and mixing capabilities.It can be widely used in pharmaceutical, chemical, food and other industries for mixing liquid and solid materials of various viscosities.The mixer has the characteristics of compact structure, easy operation, and convenient cleaning. It also has good sealing performance to ensure that there is no leakage during the mixing process.In addition, the equipment is equipped with a variety of safety protection devices to ensure the safety of operators and equipment.Next, let’s take a look at BWY550-29-45KW Read More

Reducers play an important role in industrial production. They can output deceleration torque to high-speed rotating motors to meet working conditions. Gear reducers and cycloid reducers are more commonly used types of reducers.So what are the advantages and disadvantages between the two?Advantages of gear reducer 1. Gear reducer has relatively low design and manufacturing costs due to its simple gear transmission and compact structure.2. The output torque of the gear reducer is high. Under the same or lower power requirements, the gear reducer is smaller and lighter than the cycloid reducer.3. Gear reducers are suitable for high-speed and high-torque applications, can withstand large loads, and have good durability.4. Gear reducers have more mature technology and stronger system capabilities.Disadvantages of the gear reducer 1. The gear reducer makes loud noise and obvious vibration when working, so it needs to increase the noise or reduce the vibration.2. The precision requirements of gears are relatively high and the structural design is relatively complex. Read More

Cycloidal pinwheel reducer is a common transmission device and is widely used in various mechanical equipment.However, during long-term operation, failures will inevitably occur and require repairs.This article will introduce the techniques, procedures and precautions for repairing cycloid reducers to help readers better understand the repair methods.1. Fault types of cycloidal pinwheel reducer Common fault types of cycloid pinwheel reducer mainly include: bearing wear, seal aging, gear wear, sprocket breakage, poor sealing, bearing stuck, etc.Different maintenance methods are required for different fault situations.2. Tips for repairing cycloidal pinwheel reducer 1. Cleaning Before repairing, the reducer must first be cleaned.The purpose of cleaning is to remove surface attachments and prepare for subsequent maintenance.Corresponding cleaning agents should be used for cleaning, and care should be taken to avoid corrosion of the reducer.2. After inspection and cleaning, the reducer needs to be inspected.checked Read More

The hard-tooth surface gear reducer should be regularly cleaned of oil stains and dust to keep it clean, which is beneficial to heat dissipation.If the reducer frame seal is damaged, it should be replaced immediately.The reducer should always check the remaining oil and make up for the remaining oil in time.At the same time, the parts of the hard journal reducer require more maintenance.Below, the maintenance methods of its parts will be introduced in detail.The components of the hard tooth surface gear reducer are the most important components of the reducer.Once a component fails, it may affect the operating power of the reducer.In order to ensure the normal operation of the reducer, we should pay sufficient attention to the overall design of the gears, shafts, bearing components and casing, and perform corresponding maintenance work.Regularly check the direction of the grease housing to see if the height is sufficient.If not, add grease immediately.Items that exceed the standard limits cannot be brought into the operation process.The exhaust fan is installed on the hard tooth surface gear Read More

The R series helical gear hardened surface reducer is one of the four series. In addition to the R series, there are also S series, F series and K series. These series of hardened surface reducers are very popular in the Chinese industry. It is widely used in production and large and medium-sized electrical equipment.Today we will introduce in detail the common problems in the installation and application of R series helical gear hardened surface reducers.1. When installing the R series helical gear reducer with hard tooth surface, attention should be paid to the center line alignment of the transmission system, and the deviation cannot be higher than the application compensation of commonly used couplings.Good alignment increases service life and achieves ideal drive system efficiency.2. When installing the transmission part on the output shaft, it is not allowed to hit it with a hammer. Usually, use the installation fixture and shaft end thread, and use screws to press the transmission part in, otherwise it may cause damage to the internal structural parts of the reducer.It is best to choose a rigid movable coupling. Therefore, unreasonable installation of this type of coupling will cause many problems. Read More