Zhejiang Qingmao Textile Printing and Dyeing Co., Ltd. is a wholly-owned subsidiary invested by Hong Kong Qingye Group in the mainland.
Zhejiang Qingmao Textile Printing and Dyeing Co., Ltd. is located in Shaoxing Paojiang Economic and Technological Development Zone, a famous historical and cultural city known as the land of fish and rice. It is located about 500 meters northwest of the management committee of the development zone and only one kilometer from the entrance of Hangzhou-Ningbo Expressway. It is adjacent to Ningbo Port in the east and Hangzhou Bay in the north. It is backed by the "China Textile City", the largest textile product distribution center in Asia. It is only 25 kilometers away from Hangzhou Xiaoshan International Airport, with convenient transportation and fast information.
Zhejiang Qingmao Textile Printing and Dyeing Co., Ltd. has a cotton spinning mill, a weaving mill and a cotton and linen printing and dyeing plant, covering an area of more than 450 acres, with a total investment of 130 million US dollars, a registered capital of 51 million US dollars, and more than 2,000 employees. According to the principles of market development laws and the requirements of high-tech content, the company introduced the internationally leading continuous reverse rinsing, pad steaming and drying and thermosetting dyeing methods, supplemented by automatic dyes, additives, compounding and mixing systems, and automation The highest level of German cotton and linen printing and dyeing lines, Italian air-jet looms, and fiber yarn equipment produced by companies such as RIETER in Europe and Switzerland, which represents the highest degree of automation and most advanced in the world. The company currently produces 84 million yards of high-end cotton, highly-simulated functional dyed fabrics annually, and 95% of its products are sold in developed markets such as Europe, the United States, and Japan. The products fully comply with AATCC, ASTM, BS international standard testing and Oeko-Tex standard100, EEC environmental protection standards, and the company has also introduced modern information management concepts, using advanced ERP, CRM, WMS control systems.
The successful experience of Hong Kong Qingye Group's investment in the mainland tells us that the company adopts advanced management methods, relying on high technology, people-oriented, and honesty, which will inevitably gain a foothold in the fierce market competition and achieve good economic benefits. And social benefits.
ZSY hard tooth surface reducer is widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical, textile, printing and dyeing, pharmaceutical and other fields. The working environment temperature is -40～45℃. If it is lower than 0℃, the lubricating oil should be preheated to above 0℃ before starting. This reducer can be used for forward and reverse rotation.
The scope of application of ZSY hard tooth surface reducer:
ZSY hard tooth surface reducer is widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical, textile, printing and dyeing, pharmaceutical and other fields.
1. The high-speed shaft speed is not more than 1500 rpm.
2. The peripheral speed of the gear drive is not more than 20 m/s.
3. The working environment temperature is -40～45℃. If it is lower than 0℃, the lubricating oil should be preheated to above 0℃ before starting. The reducer can be used for forward and reverse rotation.
Features of ZSY Hardened Gear Reducer:
1. The gear is made of high-strength low-carbon alloy steel by carburizing and quenching, and the tooth surface hardness reaches HRC58-62. The gears are all geared with grinding technology, with high precision and good contact.
2. High transmission efficiency: the third level is greater than 90%.
3. Smooth operation and low noise.
4. Small size, light weight, long service life and high carrying capacity.
5. Easy to disassemble and inspect, easy to install.
Our products are mainly exported to Japan, the United States, Germany, Southeast Asia and other countries and regions. Our customers include many OEM customers specializing in construction machinery. We have partnered with several of the Fortune 500 companies to become one of their major foundry suppliers in China.
How to provide goods?
Usually we will ship the goods to the sea. The factory is only 460 kilometers away from the port. It is very convenient and convenient to transport the goods to any other country. Of course, if your cargo is very urgent, Ningbo Airport and Shanghai Airport are also nearby.
What is the payment term?
When we provide you with a quotation, we will negotiate with you: EXW, FCA, FOB, CIF, CRF, DAP Etc. For mass production, you need to pay 30% of the deposit before production and 70% of the balance before shipment. Our most common way is T/T.
How to ensure the quality of your products?
First, we will check after each process. For finished products, according to customer requirements and international standards.
How many employees does your company have? What is the relationship between technicians?
We now have more than 180 employees, including 36 engineers and 28 QCs.
What is the ability of your company?
We have a number of production lines with a monthly production capacity of 1,600 units and an annual production capacity of 20,000 units.
