Views: 1 Author: WGT Publish Time: 2022-04-12 Origin: Site
Gear reducer is a rotary mechanism widely used in east China, used in tower crane machinery. Widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical and other fields. Cycloid pin gear reducer is a new transmission device which adopts cycloid tooth meshing and planetary transmission principle. Gear reducer and cycloid reducer are two different reducer, so what is the difference between gear reducer and cycloid reducer?
The difference between a gear reducer and a cycloid reducer is as follows:
1. Cycloid gear reducer meshing teeth are many, unlike only one or two pairs of gear meshing, which determines the cycloid gear reducer bearing capacity several times larger than the gear, which determines the cycloid gear reducer than the gear reducer is more suitable for heavy duty sources.
2. Cycloid gear reducer single-stage transmission speed ratio can reach 187, small power can reach 119, two-stage transmission speed ratio can reach 7569, and the theoretical single-stage speed ratio of helical gear in gear reducer can reach more than 10. But most manufacturers in the speed ratio of 6.3 is two stage transmission, 20 is three stage transmission, 0 is four stage transmission, 500 is five stage transmission.
3. More than 55KW cycloid reducer is difficult to do, individual parameters can reach 132KW. In short, a more powerful cycloid reducer can't and won't.
4. The base of small cycloid points is maintenance-free grease, which is convenient and easy to use without maintenance and grease addition.
These are the main differences between a gear reducer and a cycloid reducer when we operate and use them. We should all know the above differences between the two types of reducer.