Planetary gear reducer is a common transmission device widely used in various industrial fields.However, sometimes the reducer may have some problems, one of the most common problems is abnormal noise.So, what is the reason for the abnormal noise of the planetary gear reducer?
First, we need to understand the working principle of planetary gear reducer.Planetary gear reducer is mainly composed of sun gear, planet gear, internal ring gear, planet carrier, etc.When the motor drives the sun gear, the planet gear rotates around its own axis driven by the sun gear and also rotates around the internal ring gear.This rotational motion is transmitted to the output shaft through the planet carrier, thereby realizing the deceleration function.
However, when the planetary gear reducer makes abnormal noise, there may be the following reasons:
1. Gear wear or damage
The gears in a planetary gear reducer may become worn or damaged, which can cause the gears to make abnormal noise during meshing.In addition, if the tooth shape of the gear is incorrect or the hardness of the gear is too high, abnormal noise may also be caused.
2. The bearing is loose or fallen off
The bearings in the planetary gear reducer may become loose or fall off due to long-term use or improper maintenance, which will cause abnormal noise during the rotation of the gear.
3. Poor lubrication
The planetary gear reducer needs regular lubrication. If the lubrication is poor or not lubricated in time, it will cause friction and wear of the gears and bearings during rotation, resulting in abnormal noise.
4. Improper installation
If the planetary gear reducer is installed improperly, for example, the coupling between the output shaft and the reducer is not installed correctly, it may also cause abnormal noise.
In response to the above problems, the following measures can be taken to solve the abnormal noise problem of planetary gear reducer:
1. Check and replace worn or damaged gears
If the gears in the planetary gear reducer are found to be worn or damaged, new gears should be replaced in time.At the same time, it is necessary to ensure that the tooth shape and hardness of the new gear meet the requirements.
2. Tighten loose or fallen bearings
If the bearings in the planetary gear reducer are found to be loose or falling off, the bearings should be tightened or reinstalled in time.At the same time, the use of bearings should be checked regularly to find and solve problems in time.
3. Strengthen lubrication and maintenance
The planetary gear reducer must be lubricated and maintained regularly to ensure that all parts of the reducer are fully lubricated.At the same time, appropriate lubricants and lubrication methods should be selected to ensure good lubrication effects.
4. Check the installation
Check the installation of the planetary gear reducer, especially whether the coupling between the output shaft and the reducer is installed correctly.If improper installation is found, adjustments and corrections should be made in time.
In short, the abnormal noise problem of planetary gear reducer may be caused by many reasons.In order to solve this problem, we need to carefully check and analyze the cause of the abnormal noise, and then take appropriate measures to solve it.Only in this way can the normal operation and service life of the planetary gear reducer be guaranteed.
Our products are mainly exported to Japan, the United States, Germany, Southeast Asia and other countries and regions. Our customers include many OEM customers specializing in construction machinery. We have partnered with several of the Fortune 500 companies to become one of their major foundry suppliers in China.
How to provide goods?
Usually we will ship the goods to the sea. The factory is only 460 kilometers away from the port. It is very convenient and convenient to transport the goods to any other country. Of course, if your cargo is very urgent, Ningbo Airport and Shanghai Airport are also nearby.
What is the payment term?
When we provide you with a quotation, we will negotiate with you: EXW, FCA, FOB, CIF, CRF, DAP Etc. For mass production, you need to pay 30% of the deposit before production and 70% of the balance before shipment. Our most common way is T/T.
How to ensure the quality of your products?
First, we will check after each process. For finished products, according to customer requirements and international standards.
How many employees does your company have? What is the relationship between technicians?
We now have more than 180 employees, including 36 engineers and 28 QCs.
What is the ability of your company?
We have a number of production lines with a monthly production capacity of 1,600 units and an annual production capacity of 20,000 units.
