Views: 0 Author: WeiGao Transmission Publish Time: 2021-09-25 Origin: WeiGao Transmission
I believe you are familiar with cycloid pin gear reducer. What conditions do we need to have when using it? Let's give you a brief introduction to the relevant knowledge points.
1. The output shaft of cycloid pin gear reducer cannot be subjected to large axial force and radial force. When there is large axial force and radial force, other measures must be taken. 2. Cycloid pin gear reducer is allowed to be used in continuous working system, and it is allowed to run in both positive and negative directions at the same time. 3. The working positions of cycloidal pin gear reducers installed horizontally are horizontal. During installation, the large horizontal inclination angle is generally less than 15 °. When it exceeds 15 °, other measures shall be taken to ensure sufficient lubrication and prevent oil leakage. 4. The rated speed of the input shaft is 1500 rpm. When the input power is greater than 18.5 kW, it is recommended to use a class 6 motor with 960 rpm.
The above is the relevant knowledge of cycloid pin gear reducer. I hope the above content can be helpful to you. Thank you for your viewing and support.