What causes the vibration of general planetary reducer

Mechanical equipment makes people's work easier and faster. Now people have adapted to the mechanical age. Planetary reducer is essential in many equipment and provides very important functions. However, all kinds of faults will occur after the equipment has been used for a long time, and the planetary reducer is no exception. Among them, planetary deceleration will cause vibration, which needs to be solved as soon as possible, otherwise accidents may occur. What causes the vibration of general planetary reducer?
If there are reasons for excessive oscillation of planetary reducer, we will generally start from several aspects. Too large oscillation of base leads to problem attack, excessive wear of motor, and maybe disharmony of transmission mechanism and mechanical balance of rotor.
Excessive bearing wear: during long-term operation of the bearing, the clearance of the bearing is too large, or the imbalance may appear, resulting in bearing conflict and heating. It is worried that the conflict between the rotor and stator will directly damage the bearing. The sliding bearing is prone to oscillation. Due to the viscous effect of lubricating oil, the shaft will float, and this is also related to the bearing component. If the bearing component is larger, the wear will be faster.
Drive misadjustment: when the alignment line between the motor and the driver in the planetary reducer is not good, the oscillation frequency of the base can be said to be the speed of the planetary reducer. There may be a problem with the base planning, resulting in an unstable state in operation.
Rotor mechanical imbalance: the imbalance mentioned here refers to the imbalance under the condition of rotor stop and rolling. The rotor violates the axis and deflects and oscillates abnormally under the effect of centrifugal force.
Loose rotor parts: some parts of the motor rotor, commutator, magnetic pole, belt pulley, etc., and planetary reducer will also have these loose conditions after being used for a long time. Generally, there will be noise in the rotor under this condition. If these conditions occur, it is better to deal with them as soon as possible. The results will become more and more serious due to a long time.
When the planetary reducer vibrates, you might as well check it according to the above description, maybe you can find the cause faster and reduce the occurrence of faults.