WG-M357-S3S5-SFPLC.S20 Network managed plug-in card 100M SFPLC single fiber bidirectional transmission optical fiber transceiver module 20km

SFP type network managed optical fiber transceiver series-CN.pdf

SFP type network management fiber optic transceiver series-EN.pdf

WG-M357-S3S5-SFPLC network management型Plug-in card100兆SFPLC single fiber bidirectional transmissionFiber Transceivermodule

 

Product introduction:

         WG-M357S3S5-SFPLC.SXX series products are 10/100M centralized network-managed SFPLC single-fiber bidirectional optical fiber transceiver modules independently developed and produced by our company.It is a plug-in 1 optical and 1 electrical module product based on the SFP slot single-core LC optical port. It can be installed in a 2U 16-slot rack to implement 10/100Base-T(X) electrical signals and 100Base-X Photoelectric conversion between optical signals.Supports various speeds, single-mode/multi-mode, single-fiber/dual-fiber.The network management interface function of this device is comprehensive and simple to set up. It supports network management methods such as SNMP, WEB firmware upgrade, CONSOLE and TELNET, and can realize centralized remote management of multi-service cards on a unified remote platform.

 

Product features: Remote network management possible

Using high-performance chips to achieve non-blocking transmission and switching performance, ensuring higher security and stability of data transmission

*  The electrical port supports 10/100M, full/half duplex adaptive/forced functions

*  The electrical port supports MDI/MDIX automatic identification

*  Support SFP single-core LC optical module (meeting DMI (Diagnostic Monitoring Interface) function)

*  Support 1310/1550nm  And DWDM/CWDM wavelength specified by ITUT

*  Store-and-forward mode supports packet length 2K bytes, pass-through mode supports 9k Jumbo frames

*  Support port bandwidth control function, the step size is 64Kbps

*  Supports link line-speed loopback test (Loopback) to facilitate line debugging

*  Supports failover (LFP) function, which can quickly locate the failed link

*  Support remote power failure alarm

*  Economical inband management function, supporting 802.3ah and TS1000

*  Powerful centralized management function: supports network management protocol SNMP network management mode

*  Support hot swap

*  Simple installation, complete status indicators, and working status is clear at a glance

*  Supports 2U rack 16 channels and independent rack use.The independent desktop computer has a built-in professional communication power supply, and the rack supports dual power supply redundant backup power supply.

 

Electrical interface:1 10/100M adaptive interface, RJ45; compatible with IEEE802.3, IEEE802.3u, IEEE802.3z

Automatic IdentificationMDI/MDI-X; full/half duplex; 100m transmission distance

Optical port:1 SFP single core LC  ;Wavelength 1310nm/1550nm, transmission distance 20KM~120KM

powered by:5VDC  Card mode: central office rack; independent: built-in AC 220V or DC -48V;

Power Supply: Card Dimensions:100mm(L)*70mm(W)*26mm(H);Single size: 155mm(L)*127mm(W)*31mm(H)

Operating temperature:-20º~70℃    Relative humidity: 5%-95%

 

Applicable industries:

Metropolitan fiber optic broadband network: suitable for data network operators such as China Telecom, Radio and Television, China Unicom, and China Railcom;

Optical fiber network engineering network: suitable for private networks in finance, government, petroleum, railway, electric power, public security, transportation, education and other industries.