Views:2 Author:WeiGao Transmission Publish Time: 2021-09-28 Origin:WeiGao Transmission
In the past, when using the braking of the worm gear reducer, many places did not understand the accuracy control elements of the worm gear reducer, so some semi-automatic procedures need to be used to complete automation. In order to improve the automation efficiency, the worm gear reducer needs to have a more accurate speed, and the accuracy is mainly determined by the executed parts.
The deceleration capacity of worm gear reducer and the accuracy of control affect the following:
In the controlled process of the worm gear reducer, it is normal that there is a gap between the ideal speed and the actual speed because of the control buffer delay of the worm gear reducer. However, the speed and demand on the mouth should be as close as possible. In this case, the worm gear reducer has a longer buffer opportunity.
The speed of the worm gear reducer and the control device is the compensation factor causing the change. In the process of the worm gear reducer control circuit, it is generally necessary to have a stable supplementary device and reduction device, which is also a more appropriate compensation method of the worm gear reducer.
The automatic device of the worm gear reducer can be measured, but it will also be affected by the real situation. On one hand, even with the outlet rate data, the vehicle braking will be affected during the operation of the worm gear reducer in the control process.
For the influence factor of time length difference on speed, it can mainly reduce the buffer frequency of worm gear reducer and reduce the difference of deceleration.
The influence of the deceleration difference of the worm gear reducer will also have an impact on the braking of the vehicle. The main thing is to meet the braking demand for the reducer device in terms of its capacity.
In short, it is normal for the worm gear reducer to have deviation in the actual use ability and accurate deceleration ability control. China has been injecting a lot of time and experience in these aspects to minimize the numerical difference and control more accurately.