For the selection of worm gear reducer, the role of the reducer itself should be considered first, followed by the size of the corresponding equipment, as well as the speed ratio, installation method, assembly form, etc. of the worm gear reducer. Finally, we should also pay attention to the corresponding motor power and motor use environment. The following is a brief introduction to the selection method of worm gear reducer.
First calculate the speed ratio of the worm gear reducer (reduction ratio=motor speed (standard speed 1400)/speed of the reducer output shaft), try to choose a reduction ratio close to the ideal, and then calculate the torque. Torque calculation is very important for the life of the reducer. Pay attention to whether the maximum torque value of the acceleration exceeds the maximum load torque of the reducer; Finally, determine the direction of the input and output shaft.
Note that the oil level must be checked during use. The sealing plug of the reducer can be replaced with the exhaust plug attached to the reducer through the oil level static hole or by opening the oil plug; The standard working environment temperature of the reducer shall be maintained between - 5C and 40C. The reducer shall not be exposed to sunlight or harsh environment. Attention shall be paid to maintaining good ventilation near the motor fan without affecting heat dissipation.
Our products are mainly exported to Japan, the United States, Germany, Southeast Asia and other countries and regions. Our customers include many OEM customers specializing in construction machinery. We have partnered with several of the Fortune 500 companies to become one of their major foundry suppliers in China.
How to provide goods?
Usually we will ship the goods to the sea. The factory is only 460 kilometers away from the port. It is very convenient and convenient to transport the goods to any other country. Of course, if your cargo is very urgent, Ningbo Airport and Shanghai Airport are also nearby.
What is the payment term?
When we provide you with a quotation, we will negotiate with you: EXW, FCA, FOB, CIF, CRF, DAP Etc. For mass production, you need to pay 30% of the deposit before production and 70% of the balance before shipment. Our most common way is T/T.
How to ensure the quality of your products?
First, we will check after each process. For finished products, according to customer requirements and international standards.
How many employees does your company have? What is the relationship between technicians?
We now have more than 180 employees, including 36 engineers and 28 QCs.
What is the ability of your company?
We have a number of production lines with a monthly production capacity of 1,600 units and an annual production capacity of 20,000 units.
