Views:0 Author:WTG Publish Time: 2021-10-30 Origin:WTG
How to effectively inspect and maintain the reducer. Different lubricating oils shall not be mixed with each other. The positions of oil level plug, oil drain plug and breather are determined by the installation position. Their relevant positions can be determined by referring to the installation position diagram of the reducer. The following description of Shanghai Jinchuan reducer is mainly described through oil replacement, oil level inspection, reducer with oil level plug, oil inspection and so on.
1、 For reducer with oil level plug
Check whether the oil level is qualified; Install the oil level plug.
2、 Oil replacement
After cooling, the viscosity of the oil increases and it is difficult to drain the oil. The reducer should change the oil at the operating temperature. Cut off the power supply to prevent electric shock! Wait until the reducer cools down and there is no danger of combustion!
Inject new oil of the same brand; The oil quantity shall be consistent with the installation position; Check the oil level at the oil level plug; Tighten the oil level plug and breather; The reducer shall remain warm during oil change; Place an oil pan under the oil drain plug; Open the oil level plug, breather and drain plug; Drain all oil; Install the oil drain plug.
4、 Oil level inspection
Cut off the power supply to prevent electric shock! Wait for the reducer to cool down; Remove the oil level plug and check whether the oil is full; Install the oil level plug.
5、 Oil inspection
Cut off the power supply to prevent electric shock! Wait for the reducer to cool down; Open the oil drain plug and take an oil sample; Check the viscosity index of the oil; If the oil is obviously turbid, it is recommended to replace it as soon as possible.