Views: 3 Author: WeiGao Transmission Publish Time: 2021-10-20 Origin: WeiGao Transmission
1. The cycloid pin gear reducer is located at room temperature. Generally, No. 40 or no. 50 mechanical oil is selected for lubrication effect. In order to improve the operation efficiency of the reducer and the service life of the cycloid pin gear reducer, the Xiaobian recommends that you choose No. 70 or no. 90 extreme pressure gear oil, If it operates for a long time under extreme high and low temperature conditions, it may be necessary to re select the model of lubricating oil.
2. When refuelling for many times, the lubricating oil needs to be replaced after four or five days of continuous operation, and the oil stain inside needs to be cleaned up. In the follow-up continuous operation, the lubricating oil needs to be replaced once every six months. If the operating environment of the reducer device is relatively bad and there are many factors affecting the oil, we need to relatively shorten the time for replacing the oil. The facts show that the reducer needs to be cleaned and replaced frequently, just like once every six months, It plays an important role in extending the service life of the reducer. Smooth oil should always be compensated during use.
3. Under normal conditions, the cycloid pin gear reducer adopts lubricating oil, and the oil level can be kept in the middle of the oil window. When the operating conditions are bad and the ambient temperature is high, the mode of circulating lubrication can be selected.
4. The factory reducers are basically lubricated and replaced every six months. The grease shall be aluminum disulfide -2# or 2l-2# lithium based smooth grease.
5. For the planetary cycloid pin gear reducer of vertical equipment, be careful of the interruption of oil pump to prevent the damage of components of the reducer.
6. When refueling, you can unscrew the breather cap on the machine base to add oil. When draining the oil, unscrew the oil drain plug at the lower part of the starting seat to drain the dirty oil. There is no lubricating oil inside the reducer when it leaves the factory.
The above is some measures and instructions on the lubrication of cycloidal pinwheel reducer brought by Xiaobian.