Views: 1 Author: WGT Publish Time: 2021-12-13 Origin: WGT
The operating temperature of lubricating oil of cycloid pin gear reducer shall not exceed 90 ℃. If the temperature is too high, the physical and chemical properties of the oil will change. For example, reducing the viscosity of the varnish will reduce the bearing capacity of the varnish film, which may eventually lead to direct contact between the working tooth surface and the side glue.
B. X Series cycloidal pin gear reducer
Common methods for reducing temperature of cycloidal pinwheel gear reducer:
1. Fan cooling: if the chassis is not suitable for natural cooling, you can use a fan for cooling.
2. Natural cooling: if a typical cabinet does not meet your heat dissipation requirements, you can add a radiator outside the chassis and place it in natural air.
3. Water cooling: the oil pan of cycloidal pinwheel reducer is equipped with curved water pipe. Serpentine tubes are usually made of copper or brass. The pipe is equipped with cooling water, which can eliminate the heat of air in the oil.